Info | |
---|---|
Car model | IS300h |
VIN | JTHBH5D2805------ |
Odometer | 130,476 |
Generated at | 19/08/2017 10:44:07 |
Version | HA:94 HR:43 |
Time | |
---|---|
Start | 10/08/2017 14:58:46 |
Finish | 10/08/2017 15:44:16 |
Trip | |||||
---|---|---|---|---|---|
Total | EV | % | No Fuel | % | |
Distance | 87.73 km | 1.23 km | 1% | 4.17 km | 4% |
Time | 45:29 | 3:16 | 7% | 4:45 | 10% |
Moving | 43:55 | 1:19 | 3% | 3:11 | 7% |
Speed | |
---|---|
Average | 117 km/h |
Moving Average | 121 km/h |
EV Average | 12 km/h |
Max | 147 km/h |
Environment | |
---|---|
Start SOC | 64.71% |
End SOC | 70.98% |
Avg Ambient Temperature | 21°C |
Altitude Delta | 47 |
Fuel | |
---|---|
Consumption | 6.545 L/100km |
Usage | 5.742 L |
Cost | 7.579 |
Trip summary values are detailed by Time, Moving and EV.
Time is the total trip time.
Moving stats regards only the fraction of time while the car was not standing still.
EV stats are accounted only when the petrol engine is stopped.
No Fuel sums EV driving with the petrol engine running without fuel like coasting at high speed or driving down a slope.
Phone | |
---|---|
Manufacturer | asus |
Model | Nexus 7 |
Product | razor |
Android SDK | 19 |
Hostname | Nexus 7 |
Screen | 1920x1104 |
Scale | 2 |
OBD | |
---|---|
Connection type | Bluetooth |
Model | OBDLink LX |
MAC Address | 00:04:3E:08:3D:00 |
Name | ELM327 v1.3a |
Manufacturer | SCANTOOL.NET LLC |
Firmware | STN1155 v3.4.1 |
Requests per second | |
---|---|
Average | 27 |
Start | 35 |
End | 0 |
Delta | -35 |
Min | 0 |
Max | 39 |
Sampling | |
---|---|
Start time | 10/08/2017 14:58:46 |
End time | 10/08/2017 15:44:16 |
Duration | 45:29 |
Samples | 12576 |
Average | 0.22 sec |
Standard deviation | 0.05 sec |
Disconnections | 0 |
Corrupted frames | -1/-1 |
Information about phone and OBD adapter.
The sampling average is the time taken for reading all sensors, in seconds: the lowest, the fastest Hybrid Assistant will run.
Speed is mainly affected by OBD adapter and by other apps running on the phone.
SOC | |
---|---|
Average | 59.46% |
Start | 64.71% |
End | 70.98% |
Delta | 6.27% |
Min | 54.51% |
Max | 71.37% |
Standard deviation | 2.84% |
Variations | |
---|---|
Difference from optimum | -0.54% |
SOC gained from brakings | 22.75% |
SOC gained from coasting | 17.65% |
Total SOC gained | 40.39% |
SOC charged by ICE | 10.98% |
Levels | ||
---|---|---|
Current | Voltage | |
Avg | -0.75 A | 259.55 V |
Min | -103.06 A | 214.00 V |
Max | 139.72 A | 308.50 V |
Power | |||
---|---|---|---|
Power | Charge Limit | Discharge Limit | |
Avg | -0.333 kW | -28.500 kW | 24.000 kW |
Start | 0.011 kW | -28.500 kW | 24.000 kW |
End | 1.022 kW | -28.500 kW | 24.000 kW |
Min | -83.963 kW | -28.500 kW | 24.000 kW |
Max | 30.738 kW | -28.500 kW | 24.000 kW |
Energy | |
---|---|
Total energy from the battery | 0.654 kWh |
Total energy to the battery | 0.887 kWh |
Battery energy balance | 0.232 kWh |
Average services consumption | 1.692 kW |
Plot of power required to keep a given speed.
Values are collected only when a constant speed is maintained long enough to have a consistent reading, so a trip with many different speeds may not gather enough data to plot.
Since required energy is heavily influenced by road slope, you should drive on a plain road to have a correct reading.
Charge and discharge kW limits for the battery.
These values may change with battery level and temperature.
When the battery is nearly full, charge limit is reduced.
On low temperatures, charge and discharge limits are reduced to preserve battery life.
Be sure to follow the guideline for HV Check as specified on the official website.
Temperature | ||||
---|---|---|---|---|
Ambient | Coolant | Inverter | MG | |
Avg | 21°C | 84°C | 37°C | 75°C |
Min | 20°C | 79°C | 26°C | 72°C |
Max | 23°C | 89°C | 45°C | 83°C |
Time to reach given temperature | |
---|---|
Coolant Temperature | Time |
HV Battery Temperature Sensors | ||||
---|---|---|---|---|
Sensor | In | 1 | 2 | 3 |
% Max | - | 72% | 100% | 28% |
Max | 32°C | 36°C | 36°C | 36°C |
Avg | 27°C | 34°C | 34°C | 34°C |
Min | 26°C | 33°C | 34°C | 33°C |
Temperatures for each car component.
Engine coolant temperature is the water temperature, while inverter and MG is the actual component temperature.
For inverters and MGs, only the most significant value among all components is shown.
HV Battery has multiple sensors: usually the inner ones are higher that the outer ones. % Max shows time percentage the specified sensor was the highest of the pack.
Altitude | |
---|---|
Avg | 231 |
Start | 201 |
End | 248 |
Min | 169 |
Max | 292 |
Upward | 3,267 |
Downward | 3,183 |
Altitude Delta | 47 |
Speed | |
---|---|
Average | 117 km/h |
Moving Average | 121 km/h |
EV Average | 12 km/h |
Max | 147 km/h |
RPM | Load | Power | Timing | |
---|---|---|---|---|
Avg | 1,870 | 84% | 26.409kW | 31° |
Max | 4,450 | 100% | 98.705kW | 47° |
Min | - | - | - | -11° |
Ignitions | |
---|---|
Total | 3 |
Short | 0 |
Energy | |
---|---|
Energy from the petrol engine | 18.53 kWh |
Energy Consumption | 20.85 kWh/100km |
Fuel Consumption | 6.54 L/100km |
Fuel Usage | 5.742 L |
Engine | ||
---|---|---|
State | % | Longest Time |
ICE Running | 93% | 11:36 sec |
ICE Spinning | 5% | 0:21 sec |
ICE Off | 12% | 1:50 sec |
EV Statistics | |
---|---|
Trip Length | 87.73 km |
EV Range | 1.23 km |
Excessive EV events | 2 |
EV States | ||
---|---|---|
State | % | Longest Time |
EV | 7% | 1:50 sec |
EV traction | 1% | 0:09 sec |
Excessive EV | 0% | 0:02 sec |
Fuel Trims are the percentage of change in fuel over time.
The engine control unit keeps proper air:fuel ratio by fine-tuning the amount of fuel going into the engine.
For each RPM value of the petrol engine, the applied Fuel Trim plotted as a dot.
This map can be used to verify LGP-operating engines working condition.
Fuel Trim | |||
---|---|---|---|
Short Term | Long Term | Effective | |
Avg | -0% | -3% | -3% |
Min | -14% | -14% | -24% |
Max | 7% | 4% | 4% |
Brake specific fuel consumption (BSFC) is a measure of the fuel efficiency of an engine that burns fuel and produces rotational power.
The average BSFC value is plotted with a colored dot.
Range of BSFC excursion is plotted with a green line, so the shorter the line is, the more precise the BSFC value.
For each kW range of the petrol engine, the produced BSFC value is plotted as a dot. Light colored range depicts full value excurtion, while darker color plots standard deviation from average.
Values are collected only when engine is at working temperature.
BSFC | |
---|---|
Average | 281 |
Standard deviation | 487 |
Brakings | 18 |
---|---|
Good Brakings | 7 |
Bad Brakings | 10 |
Mixed Brakings | 1 |
Braking Efficiency | 41.67 % |
Braking while moving | 3% |
Braking while moving | 0:14 sec |
Total energy recovered by braking | 0.472 kWh |
State | % | Longest Time |
---|---|---|
Pulse | 11% | 0:03 sec |
Glide | 0% | 0:02 sec |
Approximate Glide | 0% | 0:00 sec |
Coasting | 6% | 0:21 sec |
Heretical | 52% | 3:04 sec |
Accelerator pressed | 88% | 11:04 sec |
Accelerating | 49% | 0:30 sec |
Moving | 97% | 43:48 sec |
Car operational state statistics during the trip.
States are expressed as percentage over the entire trip time and longest time span the state persisted.
Power Meter | ||
---|---|---|
Zone | % | Longest Time |
PWR | 4% | 0:16 sec |
Upper ECO | 82% | 10:26 sec |
Lower ECO | 6% | 1:16 sec |
CHG | 8% | 0:35 sec |
Accelerator Nervousness | 0.98 |
---|---|
Braking Efficiency | 41.67% |
Inefficient Ignitions | 0/3 |
Point size on scatter charts is proportional to number of samples: a small, well defined dot represent a higher confidence value than a bigger, faint dot.